Trusted Clean TPL-17-200-CE-HEAT-TCP, Руководство пользователя, Страница: 2 / 13

BEFORE OPERATING THE MACHINE
Read the manual carefully and completely before attempting to operate the unit. This manual has important
information for the use and safe operation of the machine. Keep this manual handy at all times. This machine
will assure years of satisfactory service if operated and maintained according to recommendations in this
manual. If additional information is needed, please contact your local distributor or write to:
CleanFreak
P.O. Box 569
Wausau, WI 54402
WARNING
• The machine was designed for use on carpet, floor and upholstery extraction applications as per
instructions and recommendations written in this manual. Any deviation from its proper use or
purpose and the consequential damage that may occur is the sole responsibility if the end user.
• Disconnect the power cord from the outlet before servicing. Do not leave machine connected to an
electrical outlet when unattended.
• Do not immerse or use this machine in standing water. Such use may cause electric shock.
• This equipment is not designed to handle or use combustible/volatile substances such as gasoline or
kerosene, in, on, or near the machine. The use of such materials will cause extreme hazardous
condition.
• When using an extension cord, use only a 3-prong conductor grounding cord
,
12 ga
uge
wire or heavier.
• To avoid electric shock, do not expose the unit to rain. Store it indoors only.
• Do not use the machine for dry vacuuming.
• Use defoamer at all times to prevent damage to the vacuum motor(s).
• Do not use water in excess of 170ºF (76ºC).
• To prevent seal damage and chemical build-up to the pump system, run clean water through the
solution lines after each day’s use.
• Use only commercially available carpet cleaning solutions and defoamer intended for use with
machines of this type. Do not use dyes, bleaches, ammonia, or other additives. The use of powdered
cleaning solution if not diluted properly may result in damage to the pump. If powdered chemicals are
used, premix in a separate container before placing in the solution tank.
• Do not expose machine to freezing temperatures.
• All repairs must be done by an authorized
CleanFreak
repair station.
• Do not use replacement parts other than those specified on the parts list.
For units with HEAT’N’RUN heater:
• Read and understand the HEAT’N’RUN owners manual before using the HEAT’N’RUN heater on your
GALAXY Extractor.
• Do not run heater dry.
• Water hookups must be in place and water flowing through the heater prior to turning it on. Failure to do
so may cause internal component damage and will void warranty.
• Heater must be filled with water or water based solutions at all times when in use. Turn off the switch and
unplug the heater from outlet when not in use.
• Do not use heater
with any other machine and at any pressure higher than 25
0 PSI.
• Do not immerse heater in water.
• To avoid explosion and / or fire, do not use solvents or any flammable liquid in heater.
FAILURE TO COMPLY WITH THE ABOVE WARNING INSTRUCTIONS WILL VOID THE
WARRANTY
GALAXY 2000FX-HR (BASE) PARTS LIST
ITEM # PART # DESCRIPTION QTY
1 C00297 #8 X .25 PAN HEAD 1
2 J11863 HOSE, 3 IN 1
3 J00639 SCREW CLAMP, 1.63-2.43 IN 3
4 J00618 VACUUM HOSE, 2 IN GRAY, WIRE, 22 IN LG 1
5 C00273 LOCKNUT, 1-4 X 20, NYLON, SS 16
6 F11178-BLK INTERCOOLER, GALAXY, BLACK 1
7 C00233 WASHER, FLAT, .25 IN 26
8 F00449 GROMMET 6
9 C00284 SCREW, 10-32 X .375 GROUND 2
10 B11150 GROUND WIRE, GALAXY 2
11 G02522L VACUUM, 135 IN 115 V 5.7 IN 2
12 J00657 HOSE CLAMP, 2 IN SLDPRT 1
13 J00618 VACUUM HOSE, 2 IN GRAY, WIRE, 4 IN LG 1
14 C00261 NUT, .25-20 HEX 10
15 C00254 LOCK WASHER, 1-4 IN SPLIT 1
16 D11134 VAC PLATE 1
17 C11189 SCREW, 1-4 X 20 X 4.5 IN HEX 5
18 C02312 LOCK WASHER, .25 IN., INTERNAL STAR 1
19 C11516 SCREW, 1-4 X 20 X 4.5 IN, FLAT HEAD, PHILIPS 1
20 J11154 SOLUTION HOSE, .375, 100PSI, WIRE, 31 IN. LG 1
21 J11508 SCREW CLAMP #6, .43 TO .875 IN 8
22 G11904 POWER PRIME 1
23 A00060 .25 MALE X .375 BARB, BRASS 1
24 A00053 45 ELBOW, .25MP X .25FP 1
25 G03523-1 VALVE, REGULATOR, 200PSI 1
26 A00052 90 ELBOW, .25MP X .25FP 3
27 00580-13IN-MF-A HOSE ASSEMBLY, 13 IN X .25 HP 1
28 G00516-3 GAUGE, 0-600 PSI 1
29 C11244 WASHER, .56 X 1.5 X .05 4
30 A00104 QD, 1-4 M X 1-4 FP, BRASS 1
31 A00161 TEE, .25 FP, BRASS 1
32 A00111 NIPPLE, .25 IN 2
33 C00232 WASHER, .5IN, FLAT 1
34 A00154 90 ELBOW, .25NPT X .25 NPT 1
35 C11440 SPACER, HEATER MOUNTING PLATE 4
36 K10510 PLUG, 1.25 IN, BLACK 1
37 C02322 HEX BOLT, 1-4 X 20 X 1.75 IN 4
38 D010379 HEATER MOUNTING PLATE 1
39 C11165 SCREW, #8 X 1 IN, PAN, BLACK 5
40 F11790 HEATER, TUNNEL COVER, BLUE GRANITE 1
41 B11779 STAUB, 12-3 SJTW YELLOW 2
42 B00191 NYLON TIE, 11 IN BLACK 4
43 C00293 #8 X .5 IN PAN, BLACK SMS, PHILIPS 2
44 B00192 TIE HOLDER WITH GLUE 1
45 B11606 STRAIN RELIEF, PIGTAIL 2
46 H03545 COVER, SERIAL # LABEL 1
47 H00565-5 LABEL, SERIAL NUMBER 1
48 C02305 CAP NUT, .5IN PUSH-ON 2
49 C00240 WASHER, SHOULDER, NYLON 4
50 G11767 WHEEL, 10 IN 2
51 D11170 AXLE 1
52 F11789 BASE 1
53 C00314-1 HEX BOLT, 1-4 X 20 X 1 IN 8
54 G03518 CASTER, 4 IN 2
55 G13102 PUMP, 500 PSI, 120V 1
56 B00177 TERMINAL LUG, FEMALE, QD, .25 X .032, 16-14 AWG, FULLY INSULATED 2
57 C03251 WASHER, .187 ID, BACKUP 1
58 A00168 BUSHING.375 M X .25 P BRASS 4
59 A90004 .50 BARB X .25 MP, BRASS 1
60 A00155 MALE PLUG, .25 IN, NYLON 1
61 J11933 HOSE, .5 IN POLYWIRE PVC, 33 IN LG 1
62 J00632 PULSE HOSE, PUMP-QD, 42 IN 2
63 B00190 NYLON TIE, 4 IN 13
64 D13103 PLATE, PUMP, GALAXY, FLAT 1
65 H02564-2 LABEL, CAUTION, MOTOR HOUSING 1
66 J11933 HOSE, .5 IN POLYWIRE, 30 IN 1
67 K11935 STRAINER, INLINE, 5 IN 1
68 J11154 SOLUTION HOSE, .375, 100 PSI, WIRE, 27 IN LG 1
69 J00618 VACUUM HOSE, 2 IN GRAY, WIRE, 7 IN LG 1
70 E11169 GASKET, VAC MOTOR, GALAXY 2
71 B00179-2 CLOSED END CNTR, 16-3 6