USING THE REMOTE CONTROL
OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE.
For your convenience, the remote control features the same buttons as the fan control
panel. Follow the operations in"USING THE CONTROL PANEL".
Guidelines for using the remote control (one CR2025 battery included):
Note: Remove the plastic insulation film located underneath the battery before using the
remote.
· The remote control must be pointed towards directly the receiver on the fan when using.
· The working range for the remote control is 5 meters. If the remote control is not pointed
directly towards the receiver, the range will be decreased.
· The remote control may not operate in a room where heavy machinery is operating.
· Do not block the line of sight between the remote control and the receive.
· Handle the remote control with care. Do not drop the remote control on the floor or bang it
against hard objects.
Guidelines for use of batteries
· If the remote control will not be used for a long period of time, remove the batteries from
the battery compartment.
· The remote control uses one CR2025 battery.
· Clean battery contacts and those of the device prior to battery installation.
· Ensure the batteries are installed correctly with regard to polarity, ma/- sides of the
battery to corresponding indications on the remote control.
· Remove used and dead/discharged batteries promptly.
