MODE operation
The heater is equipped with a fan, which can be used to run the appliance without heat output.
· ON/OFF/MODE:ON -F-H1-H2-OFF
Switching off
· When you no longer need the heater, after turning off the heater, the fan will continue to work and stop working
after 30 seconds.
· Unplug the heater from the power source.
Timer
：
1-12H
Safety features
Overheat protection
This heater is equipped with an automatic reset temperature control (overheatprotection), which switches the heater
off automatically in the event of abnormal overheating. While this feature provides additional safety in case of
overheating, first and foremost you should make sure to eliminate all potential reasons that can lead to overheating
and create a fire risk.
· If the overheat protection has been triggered, unplug the heater from the wall outlet. Let the heater cool for about 10
minutes. Eliminate the cause of the overheating (for example,excessive dust in the heater, or the air outlet iscovered)
and start it up again.
Tilt protection (tip over switch)
The appliance is fitted with a tip over safetyswitch, which switches the heater off automatically if it is tilted or tips over.
This prevents hazards caused by overheating.
Should this happen, place the heater uprightagain, but take care as it may still be hot. The heater will turn on again
automatically once it is back in an upright position.
WARNING: Always place the appliance on a smooth, horizontal surface without carpets in order to prevent failure of
the
safety switch.
