TrustCare 4600-BL Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 13

TrustCare 4600-BL Скачать руководство пользователя страница 12

12

Brake lever

Brake housing (cross section)

Brake wire

B

A

C

D

Brake lever

Brake housing (cross section)

Brake wire

B

A

C

D

Brake lever

Brake housing (cross section)

Brake wire

B

A

C

D

1. This is the function of the brake system on Let’s Go Out. When the brake lever is pulled up (A) the wire is stretched and the rollator
brakes. The parking prake is activated by pushing the lever down so it will lock in lowest position.

2. When the lever is pushed down th wire is stretched. The bottom end of the lever falls down into the cavity (C) and locks.

3. If the lever does not lock in the cavity, remove the two screws in the brake housing and push the housing down. Behind one of
the screws there is a washer, don’t lose it. File the corner at (D) to make it sharper so it will lock better in the cavity. If the brake
lever still does not lock, there could be a damage inside the brake housing and it must be replaced.

Year of manufacturing 2012.

Parking brake adjustments.

«
...
10
11
12
13
»

Содержание 4600-BL














Отзывы:

Нет отзывов