Trust SECURITY PLUS-LINE ALKCT-2000, Руководство пользователя

Страница: 7 / 56

1. Place battery
Open the battery slot at the back of the ALKCT by sliding it down. Place the included 3V CR2477 battery
and close the battery slot. For more information on replacing and purchasing new batteries visit
trust.com/71115
2. LED indicator
Low battery: LED will blink 2x when a button is pushed
Confirm pair/unpair: LED will blink 5x
Successful arm/disarm: LED will light for 1.5 sec
Unsuccessful arm/disarm: LED will blink shortly 3x
3. Activate the pairing mode
Consult the manual of the Siren to activate the pairing mode. Put the ALKCT in pairing mode by first
pressing the ON and OFF button simultaneously for 4 sec (untill the LED of the ALKCT starts blinking).
4. Confirm pairing
After entering pairing mode press the ON button shortly to pair with the Siren. The LED indicator of the
Siren and ALKCT will be flashing 5 times to confirm that the pairing has been done successfully.
5. Arm the siren
To arm the siren press the ON button for 3 seconds on the ALKCT.
If the siren is armed successfully the LED of the ALKCT will light up for 1.5 sec.
If the siren is armed unsuccessfully the LED of the ALKCT will give 3 short light blinks.
Check the following points if the siren is armed unsuccessfully:
- Is the siren within range
- Are siren batteries low
- Are the remote batteries low
- Is another wireless device nearby
EN