Trust Predator Extreme, Руководство пользователя

Страница: 6 / 6

10-EN EN-11
Chapter 3 - Troubleshooting
3.1 Problems and solutions
3.1.1 If your joystick doesn't respond
1. Make sure only one game port is enabled.
2. If you have a sound card with a joystick interface, disable it and use the connector already on
the PC.
3. Check your sound card's manual for instructions.
4. Check whether you have a defective Y-connector.
5. If you are using an Y-connector with the Trust Predator Extreme, disconnect it and connect the
joystick directly to the game port.
6. Change the I/O address of the card that is conflicting with the game card, or remove this card.
3.1.2 The joystick cursor cannot maintain its centre position or the cursor will not move in one
direction
1. Make sure you have calibrated the Trust Predator Extreme for the game you are using.
2. Make sure you have set the trim controls to their centre position.
3. Check if you have used another joystick in your system prior to replacing it with Trust
Predator Extreme. Your game might need recalibration then.
3.1.3 The Throttle Controller doesn't work
1. Before starting a game which supports Throttle Control, make sure that you have set the
Throttle Controller to zero.
2. Refer to the instructions of the software program which you are playing to set up the Trust
Predator Extreme Throttle Controller to zero.
3. In some games, you need to set up the Trust Predator Extreme as 2 joysticks. Set joystick one
as "Yoke" and joystick two as "Throttle".
3.1.4 The button works in one program but not in another
1. Each time you switch games, the function of the Trust Predator Extreme's button may also
change.
2. Refer to the game's instruction manual to learn how to assign functions.
3.2 Cleaning
1. Keep the Trust Predator Extreme free of dust by wiping the surface with a dry, soft cloth.
2. If the Trust Predator Extreme should require cleaning, wipe it with a cloth slightly dampened
with clean water.
3. Never immerse the Trust Predator Extreme in any liquid.