Trust Precision Viewer Monitor
2
1. Introduction
This instruction manual is intended for users of the Trust Precision Viewer Monitor. Prior knowledge of
computers is not necessary to install this product. If you have any questions, please consult one of the Trust
Customer Care Centers. You can find more information about these Customer Care Centers on the last page
of this electronic manual, as well as at the back of the quick installation manual.
These monitors are suitable for professional use in an office environment. The Precision Viewer Monitors are
versatile, ergonomic and easy to use.
1.1
Conventions used in this manual
The following conventions have been used in this manual to indicate instructions:
<
key
>
Here you should press a key. The name of the key is given between brackets.
‘
System
’
This is a specific term used in a program. These are the terms used by, for example,
Microsoft Windows 98.
[
DIR
]
Key in the text shown in square brackets [….].
(term)
The text between the parentheses (….) is the English term, e.g. (File) used in the figure
referred to.
Additional information will be shown as follows:
Note
:
Do not leave this device out in the rain.
The examples assume that the letter “D” has been assigned to your CD-ROM drive. If your system uses a
different drive letter for your CD-ROM drive, for example “E”, you should replace “D” by “E”.
1.2
Contents of the package
Before reading the manual, please check the contents of the package. It should contain the following:
Precision Viewer 17”
Precision Viewer 19”
•
Monitor
•
Monitor
•
Swivel-and-tilt
base
•
Swivel-and-tilt
base
•
Signal cable (fixed)
•
Signal
cable
•
Power cable for connecting to
the computer
•
Power cable for connecting to
the computer
•
CD-ROM containing the drivers
and the instruction manual
•
CD-ROM containing the drivers
and the instruction manual
•
Quick installation manual
•
Quick installation manual
Table 1: Contents of the packaging
If anything is missing or damaged, please contact one of the Trust Care Centers. You can find more
information at the back of this instruction manual.
1.3
Minimum system requirements
•
A computer with a standard VGA signal