Formula 1 Race Master
5
Figure 3:
The Control Panel in Windows 95
6. Select “Joystick 1” under “Current Joystick”.
7. Select “2-axis, 4 button joystick” under “Joystick selection”.
8. Click on “Calibrate” and follow the on-screen instructions.
9. Click on “Test” to test the Formula 1 Race Master. Follow these steps again if the
Formula 1 Race Master does not work properly, or consult the chapter
“Troubleshooting”.
10. Your Formula 1 Race Master has now been installed.
3.3 Use with Windows 3.1x and DOS
You do not have to install the Formula 1 Race Master under Windows 3.1x or DOS.
Your Formula 1 Race Master will be ready for immediate use after you hook it up and
turn on your computer.
It is possible that you will have to calibrate the Formula 1 Race Master in a game.
Consult the manual of the game if such is the case.
3.4 Setting switches
The optimal switch setting for games is displayed in the table below:.
Switch K
Race games
gas and brakes
