Dual Shock Rally Master
3
c) the equipment has been dropped and/or the casing has been damaged;
5.
Do not connect or disconnect any equipment while the computer is still switched
on, as this may result in damage to the equipment.
6.
Position the device so that its cables cannot be damaged.
3. Assembling and connecting the wheel
Figure 1: The wheel parts
Follow the instructions below to assemble and connect the wheel:
1.
Mount the foot on the wheel and secure it by inserting the 4 plastic pins supplied
(A) into the tabs (B) on the bottom of the foot. See Figure 1.
2.
Switch off your PlayStation.
3.
Connect the pin connector from the wheel (C) to a free game port on your
PlayStation.
4.
Place the wheel on a chair and sit on the foot.
5.
Switch on your PlayStation.
6.
Press the MODE button (F) to select a vibration mode. See chapter 4 for more
information.
7.
Start the game.
Note:
Do not play with the wheel while starting up your PlayStation. The wheel
will be calibrated automatically during the start-up.
Note:
Do not connect the wheel if your PlayStation is still switched on. This may
damage the system.
The Dual Shock Rally Master is now ready for use. See chapter 4 for how to operate
the wheel.
