TRUST 962Z POWERC@M OPTICAL ZOOM
10.3
Saving photographs on a computer
The photographs are saved in the camera’s memory. A ‘Removable disk’ is displayed
in My Computer.
1.
Double-click on the My Computer icon. Click on the ‘Removable disk’, click on
the ‘DCIM’ folder and click on the ‘100MEDIA' folder.
2.
Files can be saved on your computer, for example, in the My Documents
directory, by means on drag and drop.
11 Viewing photographs and video clips on a
television
This camera allows the user to view the photographs and video clips on a television.
Note:
Turn the camera off before connecting it to a television.
Note:
See the instruction manual provided with your television or video
recorder for the correct TV standard and possible video connections.
Note:
If your TV or video does not have a composite video input, then you
can purchase a composite-to-SCART adapter from your local TV shop.
11.1 Connecting
1.
Connect the video cable’s mini-jack connector to the camera’s Video-out
connection (6, figure 3).
2.
Connect the yellow RCA plug to the Video-in connection on your TV or video.
3.
Set the television to the video channel.
4.
Set the camera to the Playback mode.
Note:
The camera’s Video-out connection is not suitable for connecting to
your TV’s aerial connection. Your TV must have a Video-in connection.
Note:
If the image on the TV is black-and-white instead of colour, adjust the
TV output on the camera (PAL/NTSC)
Tip:
If you do not see an image and your speakers emit a loud noise, then
you have probably connected the video plugs to the wrong connection
on your TV. Check the connections and try again or see the instruction
manual provided with your TV.
11.2 Selecting
PAL/NTSC
PAL is the TV standard used in most European countries. Carry out the following to
configure the camera for NTSC.
1. Turn
the
camera
on.
2.
Turn the multi-select button to SET.
3.
Press the control button to the right until ‘TV Mode’ is displayed.
4.
Press the control button downwards to select the correct TV standard (PAL or
NTSC).
5.
Press the Set button to confirm the selection.
14
