TRUST 630 USB 2.0 CARD READER
7
U K
Problem
Cause
Possible solution
A drive letter
is shown for
the card, but
it cannot be
opened.
The card has not been
formatted or has not
been formatted
correctly.
Format your card using Windows
Explorer or Finder (Mac). Note: all the
data on the card will be deleted.
Note:
If you format a card on your computer
and then use it in your digital camera,
the device may no longer recognize the
format of the card. It is, therefore,
recommended to always format the card
using your digital camera.
No data can
be written to
the card.
If you use a Memory
Stick or a Smart Media
Card, then the card
may be write-
protected.
For Smart Media:
Remove the round sticker on the back of
the card.
For Memory Stick:
Move the slide on the back of the card to
the other side to hide the red square.
The photograph file
has not been copied
to the folder where
your camera saves
photograph files.
Make sure the photograph files are
copied to the folder on the card where
the camera saves photograph files.
Depending on the type of camera, this is
usually the ‘DCIMAGES’ folder.
The
photograph
file added to
the card
from My
Computer is
not
recognized
on my
digital
camera.
The photograph file
may not have been
saved by the camera.
Only use photograph files which have
been taken by the camera concerned.
Some cameras may have their own
compression format (for example, Trust
FamilyC@m 300).
Use the camera’s TWAIN driver to
transfer photographs and leave the
memory card in the device.
If you still have problems after trying these solutions, please contact one of the Trust
Customer Care Centers. You can find more information at the back of this instruction
manual. Please have the following information available:
•
The item number. This is 13678.
•
A good description of what does not work.
•
A good description of when the problem occurs.
