Trust 56K V92 External Modem
5
UK
Note:
The above letter ‘
D
’ serves to denote your CD-ROM player. Check which letter represents your
CD-ROM player in your computer.
6. The driver will be located. Follow these next instructions for further installation. Two elements will be
installed:
- Trust 56K V92 External Modem
- Trust 56K V92 External Modem Wave Device (Windows 95, 98, Me only)
7. Restart your system after the installation of the driver.
3.3 Installation in Windows NT4
1. Start up Windows NT4 and log in as ‘Administrator’.
2. Place the CD-ROM with the driver and the applications into your CD-ROM player.
Note:
It may be that the Trust Software Installer starts up automatically when you insert the CD-ROM.
You won’t need it at this point and may close it for now.
3. Go to ‘Start – Settings – Configuration screen’ and double-click the icon ‘Modems’.
4. Check the option ‘Do not detect modem; Select from list’ and click on ‘Next’.
5. Click on the button ‘Diskette...’.
6. Type the command [
D:\WinNT4
] and click on ‘OK’.
7. Select the ‘Trust 56K V92 External Modem’ and click on ‘Next’.
8. Select the COM port to which the modem is connected (usually COM2) and click on ‘Next’.
9. Select your country from the list and fill in the city code of the city where you live. If your modem is
connected to an in-home telephone exchange, also fill in the number you have to dial in order to get an
outgoing line. Click on ‘Next’.
10. Click on ‘Complete’ to complete the installation.
11. Click on ‘Finish’. Your modem has now been installed.
Note:
If you have never had a modem in your system before, you must first install ‘RAS Dial-up
networking’. This will happen automatically when you make a new ‘Dial-up’ connection. Follow the
directions onscreen. It may be that after that, you have to restart your computer.
3.4 Software
installation
Follow the directions below in order to install the provided application ‘SuperVoice 2.2i’ on your computer:
1. Start up Windows.
2. Place the CD-ROM with drivers and applications into your CD-ROM player.
3. The Trust Software Installer will start up automatically. If it doesn’t, go to ‘Start – Execute’ and type
[D:\Setup.exe] in the entry field. Then click ‘OK’. See Figure 1.
Figure 1: Trust Software Installer
Note:
The language selection menu in the left box is only intended for the rendering of the Trust
Software Installer in various languages.
4. Click on the button ‘SUPERVOICE 2.2J’ to start the installation of this application.
5. Select the desired language of the program.
