TRUST 350CW MOUSE CARDREADER WIRELESS
4
1.
Click on ‘Install Cardreader Driver’ in de Trust Software Installer.
2.
Follow the on-screen instructions.
3.
Restart your computer if requested to do so.
5.2.2
Installing the mouse software
Start the Trust Software Installer as described in chapter 5.2.
1.
Click on ‘Install Mouse Utility’ in de Trust Software Installer.
2.
Select the language you wish to use and click on 'Next'.
3.
Click twice on ‘Next’. A window will appear in which you can select how many
buttons the mouse has.
4.
Select ‘5 button’ and click on ‘Next’.
Select ‘PS/2’ as the type of connection (only for Windows 98 and Windows
ME).
5.
Click three times on ‘Next’ to complete the installation.
6.
Restart your computer if requested to do so.
5.3 Connecting
The device has a USB plug. This means that the device is hot-swappable.
Therefore, you do not have to turn off your computer if you wish to connect the
device.
1.
Connect the device to a USB port on your computer.
2. Windows
will detect new hardware connected to your computer. The drivers
for the card reader and the mouse will be installed automatically.
The green LED on the card reader/receiver will be lit once it has been connected to
the USB port.
5.4
Making a wireless connection
1.
Make sure the computer is turned on.
2.
Make sure the devices are no more 1 meter apart and there are no objects
(or metal surfaces) between them, since this will reduce the quality of the
connection.
3.
Make sure the batteries have been inserted into the mouse and they have
been sufficiently charged.
4.
Press the purple button (E, figure 2) on the front of the receiver. The green
LED will start to flash.
5.
Press the round ID button on the bottom of the mouse (A, figure 3). The
green LED will start to flash more quickly and then stop flashing. The LED will
remain constantly lit. A connection has now been made between the mouse
and the receiver. The mouse will now work as a standard mouse. When the
receiver receives data (from the mouse), the LED will flash quickly.
6.
When there is interference or another device is using the same channel,
switch to another channel by moving the switch inside the mouse (B, figure
3).
The receiver has a green indicator to display the connection status. This indicator is
located in the receiver’s purple button.
