PVC Summary:
VPI
:
The valid range for the VPI is 0 to 255. Enter the VPI assigned to you. This field may
already be configured.
VCI:
The valid range for the VCI is 1 to 65535. Enter the VCI assigned to you. This field
may already be configured.
ATM QoS:
Select the Quality of Service types for this Virtual Circuit. The ATM QoS types
include CBR (Constant Bit Rate), VBR (Variable Bit Rate) and UBR (Unspecified Bit Rate).
These QoS types are all controlled by the parameters specified below, including PCR, SCR
and MBS.
Select
CBR
to specify fixed (always-on) bandwidth for voice or data traffic. Select
UBR
for
applications that are non-time sensitive, such as e-mail. Select
VBR
for burst traffic and
bandwidth sharing with other applications.
PCR:
Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell
Rate (PCR). This is the maximum rate at which the sender can send cells.
SCR:
The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be
transmitted.
MBS:
Maximum Burst Size (MBS) refers to the maximum number of cells that can be se
at the peak rate. Type the MBS, which is less than 65535
nt
Encapsulation:
ISP:
Select the encapsulation type your ISP uses from the
Encapsulation
list.
Choices vary depending on what you select in the
Mode
field.
Dynamic IP: Select this option if your ISP provides you an IP address automatically. This
option is typically used for Cable services. Please enter the Dynamic IP information
accordingly.
22
Содержание 15898
Страница 20: ...Step1 Set your new password Step2 Choose your time zone 18...
Страница 21: ...Step3 Set your Internet connection 19...
Страница 22: ...Step4 Restart your ADSL2 Router 20...
Страница 60: ...4 7 Help 58...