TRUST 1490Z POWERC@M OPTICAL ZOOM
14 Solving
problems
Method
1.
Read the solutions given below
2.
Check for up to date FAQ. drivers and manual on
the internet (www.trust.com/13985)
!
Messages on the LCD screen and solutions
Message
Solution
[Batteries almost flat!]
The batteries are almost flat. The camera will be
turned off. Replace the batteries with fresh ones.
[The memory is full!]
The memory or the memory card is full. Make a
back-up of your photos and delete photos you do not
want or format the memory card.
[File error!]
There is a fault in the file selected. Copy the file to
the PC and delete from the camera. Check the file
on the PC.
[No image!]
There are no images in the memory or the memory
card.
[Card error!]
The camera cannot format the memory card. Use a
card reader or try another memory card.
[Card locked!]
Card is write protected, remove the protection from
the card.
[No card!]
There is no memory card in the camera.
Table 9: messages on the LCD display
Problem
Cause
Possible solution
Press the on button to turn
on the camera.
The batteries are
discharged. Replace the
batteries with fresh ones.
See the chapter about the
batteries.
The batteries are inserted
incorrectly. Check the
battery orientation. See the
chapter about the batteries.
The camera is not
receiving power or
is switched off.
The camera is turned off.
The camera is in stand-by
mode. Press any button on
the camera to activate the
camera
The camera will not
take a picture.
Is the memory or the
memory card full?
Make a back-up of your
photos and delete photos
you do not want or format
the memory card.
18
