5.1 SoundCard
- USER’S MANUAL
2
Hardware Installation
Power down PC and disconnect power plug.
Open PC Case and place card in PCI slot.
Connect Power plug and Power on PC.
When the setup prompts there is no card found, install the card in a different PCI slot.
In case of “New Hardware Found” message, click “cancel”.
If there are other problems, try to uninstall other soundcard drivers first and disable the onboard soundcard in
the PC BIOS. (see motherboard manual). After this install the Trust driver again.
Software Installation & Configuration
Place Trust Installation CD and click: Install driver. After the installation is complete reboot the PC.
Connect speakers and microphone as indicated.
Click the taskbar Icon.
Windows7/ Vista:
Select 6 Channel system input and 6 Speakers analog output.
XP:
Select 6 Speaker analog output.
Advanced Use
Advanced speaker settings
A:
Click the Hammer icon to change advanced settings. (Only available in 5.1 speaker output mode)
B:
Swap center/bass output: this option corrects a problem with some speaker sets that the center
speaker produces the sound of the subwoofer.
C:
Bass Enhancement: Activate subwoofer during music playback.
D:
Select “DVD Title” for the best bass results.
Effects
Open the effects page
A:
Select different environments for echo effects.
B:
Shape the sound frequencies with the Equalizer sliders.
C:
Load built-in presets
D:
Save your own custom Equalizer settings.
Mixer
Open the Mixer page
-
Select Speakers and move volume slider up.
-
Select Microphone and move volume slider up.
7
6
5
4
10
9
8
3
2
1