background image

TRUST 100MB SPEEDSHARE PCI CARD 

U K  

5.  

Select 

Specify the location of the driver (Advanced) 

and click 

Next. 

6.  

Select 

Search for the best driver for your device (recommended), 

select 

the correct path D:\Driver\WinME (assuming your CD-ROM drive is drive D: ) 
and click 

Next

.

 

7.  

Windows ME will open a window saying that Windows is now ready to install 

the driver, click 

Next. 

8.  

Then click 

Finish

9.  

After Windows ME successfully installs the driver you will be prompted to 

restart your computer. Please make sure you remove the CD from the CD-
ROM drive and click “Yes” 

 

4.2.1 

Verifying Windows ME Installation 

1.  

After restarting your computer right-click on

 

My Computer

 

icon, select

 

Properties

, and then click

 

Device Manager.

 

2.  

Select Network adapters in the Device Manager list.  

3.  

If a yellow exclamation mark or a red X is showing next to the network 
adapter device the driver needs to be reinstalled, see 4.2.. 

4.  

Locate the Trust 100MB Speedshare PCI Card in the hardware list and right 
click, select properties. 

5.  

In the General tab you should see “This Device is working properly.”  in the 
Device Status box. 

 

4.2.2 Windows 

ME 

Configuration 

1.  

From the windows desktop select the Start

 

button and then open the 

Control 

Panel

 and select the 

Network

 icon. 

2.  

In the Network window select the 

Configuration

 tab. 

3.  

It is recommended that you select 

TCP/IP

 

4.  

Select the 

File and Print Sharing

 button. 

5.  

To allow other computers on your network to have access to your files and to 
print from your printer you must select the two options in the 

File and Print 

Sharing

 window. 

6.  

Then click 

OK. 

 

4.3 Windows 

2000 

1.  

Ensure your Trust 100MB Speedshare PCI Card is connected to the host 
computer. 

2.  

Turn on your computer 

3.  

Windows 2000 will automatically install the necessary driver for your Trust 
100MB Speedshare PCI Card. 

 

4.3.1 

Verifying Windows 2000 Installation 

1.  

After restarting your computer right-click on

 

My Computer

 

icon, select

 

Properties

, and then click

 

Device Manager.

 

2.  

Select Network adapters in the Device Manager list.  

Содержание 100MB








Отзывы: