TruSens N-300, Руководство пользователя

Страница: 5 / 11

9 8
GETTING STARTED
1. Prepare the water filter
Remove plastic bag from filter. For optimal performance, submerge filter in bowl of water for 1 hour.
WARNING
Always unplug the humidifier before removing the water tank. Empty all water before cleaning
water tank, replacing filter or moving the humidifier. Only place the water tank on a hard, solid
surface; do not place on carpeting.
2. Install the water filter
a) Unscrew gray cap. b) Secure the filter onto gray cap. c) Tightly secure gray cap with filter onto water
tank until indicator meets lock symbol. Failure to properly tighten gray filter cap may result in leaking.
Return water tank on top of base.
4. Set up
Place humidifier on a dry, firm, flat surface that is free from obstructions.
Note: Failure to properly tighten gray filter cap may result in leaking.
Open lid of battery chamber found on SensorPod (bottom) and insert 2 AAA batteries (provided).*
SensorPod will automatically begin monitoring if humidifier is on.
For optimal results, place SensorPod on a tabletop or counter across the room, within line of sight of
the humidifier.
Control the humidifier with the touch buttons on SensorPod.
3. Fill the water tank
Remove water tank lid and fill with room temperature water (preferably distilled) with pitcher.
The light in the tank is blue when it contains sufficient water (tank is red when it needs refilling).
NOTE: When the base reservoir is completely
dry, like at the first use or at the start of each
new season, there may be a delay of up to 30
seconds before mist is produced.
*
WARNING: Do not pour water into the mist
outlet or directly into the base/reservoir. Do not
fill over the “Max” indicator line.
CAUTION: Heavy object. To avoid injury always
fill tank from the top and use care when lifting.