Truper ROU-A3, Руководство пользователя

Страница: 6 / 24

Assembly
Axis
lock
1/8”
Dust
extractor
6
• Disconnect the router from the power source.
• Press the axis lock to prevent rotation.
• Without releasing the axis lock and with a spanner loosen
the chuck nut.
• Set the bit and tighten the chuck nut.
• Release the axis lock and double check the bit is fixed
before starting the router. Allow the bit shank to stick out
from the chuck, at least 1/8”.
• To remove the bit just press the axis lock and using the
spanner loosen the chuck nut.
Bit assembly
• Use the long screws to fit the dust
extractor onto the router base. The
extractor adaptor is suitable for vacuum
cleaner with a 36 mm diameter.
Dust extracting assembly
(optional)
• Assemble the parallel guide fixing
both rods with their respective
screws, washers and washer
springs, as shown in the
illustration.
• Once assembled slide the rods through
the orifice in the router base. Set he parallel
guide on the work piece edge to make
straight cuts.
Parallel guide assembly and installation
Tip for circular cuts
• Turn the parallel guide upside-down and insert the
attachment into one of its two holes to fix the router and
make circular cuts.
ENGLISH