Truper 28147, Руководство пользователя, Страница: 24 / 36

6
• When loading or unloading the mixer keep both legs
firm and balanced.
• Never stand up on the mixer. It could tilt over you or the
moving parts could trap you and cause severe injury.
• Remember the mixer can only be manipulated and
controlled by means of the control flywheel and when the
motor is running. Do not set your hands or your body
close to the mixer when the motor is running. Do not get
your hands or body near the moving drum.
• Never load material into a stopped
drum. It shall always be in movement.
• Never stop a loaded drum. It shall be
unloaded and empty before stopping it.
• DO NOT TOW. The mixer shall never
be towed away using a vehicle.
• Do not leave the mixer unattended and unsupervised
until is turned off and has come to a complete stop.
CAUTION
CAUTION
CAUTION
ENGLISH
Safety warnings for
concrete mixers
2 pc. 10” Wheels
2 Paddles
1 Angle
Support for
Wheels
1 Flywheel
1 Plastic
Gasket
1 Floor
Support
1 Drum
Axis Mount
(Motor)
1 Drum
Lower part
1 Drum Upper
Cover
1 Motor
Housing
1 Base
for the
Motor
1 Rubber
Support
for the
Motor
1 Gasoline
Motor 2,5 Hp
1 Pulley
1
Band
1 Drum
Axis Bracket
(Flywheel)
1 Pedal
Lock
1 Lock
Rod
1 Spring
Lock
1 Type “C”
support for
the Drum
3 pins 2 for the wheels and 1 for the pedal spring
9 sets (*) M8x70 Supports Hex Screws
4 sets (*) M8x20 Brackets Hex Screws
10 sets (*) M8x16 Drum Hex Screws
1 sets (*) M6x25 Insurance Rod Hex Screws
4 sets (*) M10x20 Paddles Recessed Head Screws
(includes insulated washers to seal the drum)
1 retainer ring For the drum axis
*
Each set includes: screw, washer and nut.
Parts List
BOX 2 Nuts and Bolts
BOX 1
Spark Plug
Key