Truper 24059, Руководство пользователя

Страница: 19 / 24

Rotation selector lever
in the drilling position
Switch
Chuck
Bit
Chuck
wrench
Turn on and operation control
• Intermittent operation:
Connect the plug into the power inlet.
Press the switch ( A ) to start the hammer drill.
To stop, just release the switch.
• Continuous Operation:
Connect the plug into the power inlet.
Press the switch ( A ) and block it pressing the continuous use button ( B ).
To stop, press and then, release the switch.
Rotation direction
• To get the bit to rotate forward and drill, move the rotation selector lever ( E )
towards the arrow pointing the chuck.
• To get the bit go reverse and use the tool as a screwdriver, move the rotation
selector lever towards the arrow pointing the hammer drill handle.
Never use the tool in reverse when the impact-rotation selector is
in the IMPACT ( ) position, otherwise, the impact system will be severely
damaged.
Bit fitting
• Put the bit into the chuck until it stops. Fasten with the
chuck wrench and tighten alternately the chuck into
each of the orifices.
Changing from hammer drill to drill
• To drill concrete, floor tile or materials of similar hardness, move the impact-rotation
selector (
D
) completely into the IMPACT ( ) position. The bit will simultaneously impact
and rotate onto the material.
• To drill metal, wood or plastic, move the impact-rotation selector completely into the
ROTATION ( ) position. The bit will rotate onto the material.
Do not try to drill metal; wood or plastic with the hammer drill into
IMPACT ( ) mode setting. Otherwise the tool efficiency will lessen and the bit tip would
get damaged.
7
Start Up
A
D
E
B
ENGLISH
WARNING
WARNING