Switch
7
Assembly
Start Up
• Turn the canister upside down and install the four legs
with casters to the base of the canister (
D
).
• Stand the canister upright, align the canister lid with the
canister and close the vacuum, making sure the blow-off
port points away from the vacuum port.
• Insert the hose into the vacuum port and twist clockwise to
secure it in place (
E
).
• If necessary, connect one or more extension tubes to the
free end of the hose.
• Choose the appropriate nozzle and connect it to the free
end of the hose or, if necessary, to the
extension tube (
G
).
• To turn the vacuum cleaner on, plug the power cord into the
electrical outlet.
• Install the switch in the on position “
I
” (ON).
• To turn the vacuum cleaner off, install the switch in the “
O
”
(OFF) position, and disconnect the power cord from the
outlet.
• Always verify that the switch is in the off
position before connecting the power cord to the outlet.
Setting ON and OFF
D
G
H
E
• Open the vacuum as instructed on page 6 to verify that
the dry vacuum cartridge filter is properly installed.
• If not, remove the blower (see page 8) and turn the
canister lid upside down.
• Install the filter in the filter cage (
H
) as shown. Then install
the motor cover in place.
• Do not vacuum or work near toxic,
flammable, or explosive materials as indicated
in the safety warnings on page 5.
• For dry vacuuming do not use the foam
filter for liquid vacuuming.
• At the end of the vacuuming job, empty the
container before storing the vacuum cleaner.
Dry vacuuming
ENGLISH
CAUTION
CAUTION
WARNING
