Note
Each handle can be clamped in 2 positions using indexing.
2. Rotate the clamping lever (3) approx. 2 full turns.
3. Swivel the handle.
4. Fix the clamping lever (3) in place.
3.5
Rotating the motor handle
Damage to property due to dust being drawn into the
ventilation slots
Rotate the motor handle so that no dust can be drawn in at
the air suction point.
Fig. 38394
For applications where the machine is used at a 90° tilt, it is
beneficial to rotate the handle accordingly.
1. Press down the release knob (1).
2. Rotate the handle (± 90°).
3. Release the release knob (1).
4. Click the handle into place by turning it slightly.
14
Selecting a punch
2011-04
E528EN_06
Swiveling the handle
