Trumpf BendMaster 150, Руководство оператора

Страница: 38 / 258

The plant decree and the administrative regulations of the Fed-
eral states explain how this principle of precaution should be
adhered to.
Water-pollutant materials ■ Lubricants
Water Hazard Class 1 or 2
Volume of water-pollutant materi-
als ≤ 5 l (≤ 1.32 gal)
Hazard level of the machine A
Water protection specifications Tab. 1-7
Outside the Federal Republic of Germany, the respective
national regulations as regards water protection must be adhered
to.
5.5 Using spare parts, accessories,
software and operating materials
Spare parts and accessories that have not been released by
TRUMPF (in the following: "External parts and accessories") are
not checked. Installing and using external parts and accessories
can change design-related properties of the machine and
weaken the safety.
Only software that has been approved for installation by
TRUMPF may be installed.
■ TRUMPF is not liable for damage if external parts and
accessories are used or if spare parts and accessories
approved by TRUMPF are not installed or replaced properly.
■ TRUMPF cannot be held liable for damages resulting from
the installation or operation of software which is not
approved by TRUMPF.
The permissible operating materials (especially lubricating and
cleaning agents) must be used as per the regulations. If a safety
data sheet has been prescribed for the manufacturer of the oper-
ating material (European Directive 1907/2006 REACH), the
instructions in it must be followed, such as:
■ Chemical properties.
■ Physical and safety-related specifications.
■ transport.
■ Regulations
■ Safety measures, storage, and handling.
■ Procedures in the event of accidents or fires.
1
‐
22
Organizational measures to be taken by the user 2015-06-01
B579EN
Outside the Federal
Republic of Germany
Using spare parts,
accessories and software
Liability disclaimer
Using permissible operating
materials as per the
regulations