Pairing procedure:
1.
Take out the earbuds form case at same time, both earbuds will start blinking with red and blue led. In
few seconds one of the earbud’s red/blue led will stop blinking and other will keep blinking
.
2.
T
urn on mobile’s Bluetooth and search for new device. Then select
trüke Fit 1, now your Fit 1 earbuds
will be paired with mobile and ready to use.
Stereo/Mono mode switching procedure.
If your mobile is showing 2 trüke Fit 1 devices in Bluetooth option, then it is in mono mode, means only one
earbud will connect to mobile at a time. To switch from mono mode to stereo mode follow the below process
1. Turn off the mobile Bluetooth.
2.Take out both earbuds from charging case, both will start blinking.
3. Now press the button on right earbud 2 times. After this one earbud will stop blinking,
4. N
ow turn on mobile’s Bluetooth and connect with
trüke Fit 1. (Search for new device in Bluetooth option if not
showing fit 1 device.)