Support: 1-855-473-7449 or 1-408-943-4100
Email:
Page 11
5 Connect Network and Power Cables
Connect the network cable to the router or switch and to a gigabit networking port. Plug the power cable into the
TrueNAS Mini and a power outlet.
5.1 Powering on the TrueNAS Mini
The Power and Reset buttons control the power state of the TrueNAS Mini. These buttons behave in the same
manner as standard PC power and reset buttons. When the system is off, pressing the power button will turn the
system on. Pressing and holding the power button while the system runs will perform a hard power off. The reset
button will reboot the system.
By default, the Mini will power on as soon as you plug the cable into a live power source and, in the event of power
loss, power on whenever power restores.
5.2 Notice: High Draw USB Devices
The current draw on the Mini power supply’s +5Vsb line can exceed specifications if high-draw USB devices are left
attached to the rear USB ports when the Mini is powered off.
Unplug high-draw devices (such as bus-powered USB hard drives) before powering off your Mini.
