manualshive.com logo in svg

TrueNAS ES24F, Основное руководство по настройке

Поделиться
Скачать
TrueNAS ES24F Скачать руководство пользователя страница 4

Support: 855-473-7449 or 408-943-4100                                     Email: 

[email protected]

Page 2

Two 3-meter Mini SAS HD to Mini SAS 

HD cables�

1.3  Unpacking the Unit

iXsystems products are carefully packed and shipped with trusted carriers to arrive in perfect condition� If there is 

any shipping damage or any parts are missing, please take photos and contact iXsystems Support immediately at 

support@ixsystems�com

 or 

855-GREP4-iX (855-473-7449)

 or 

408-943-4100

�

Please locate and record the hardware serial numbers on the back of each chassis for quick reference�

Carefully unpack the shipping boxes and locate these components:

Accessory kit with 2 IEC C13 to NEMA 

5-15P power cords, 2 IEC C13 to C14 

cords, and a set of velcro cable ties�

DB9 to 3�5mm serial cable

Set of rackmount rails with hardware�  

Kit includes 2 rail retention extend-

ers, 2 short, 2 standard, and 2 long 

M4 screws

ES24F Expansion Shelf

Up to 24 populated 2�5” drive trays, 

depending on the purchase� Air 

baffles are installed in any remaining 

drive bays�

Содержание ES24F













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды