TrueLife SonicBrush GL UV, Руководство пользователя

Страница: 3 / 44

3
UV Steriliser
1. Power cord input
2. Case cover
3. UV lamp
4. Button to unlock case cover
5. Holder for toothbrush/brush head
INSTRUCTIONS FOR USE
Sonic toothbrush
1. Place the brush head onto the body of the toothbrush.
2. Select the cleaning mode using the button. If you intend to use the same mode as
in the previous use, there is no need to reset the toothbrush.
- CLEAN – Regular mode for brilliantly clean teeth
-
SOFT
– Gentle brushing for sensitive teeth and gums (may also be suitable for
users less accustomed to sonic cleaning)
- WHITEN – For brushing with tooth polishing
- MASSAGE – For gentle gum stimulation
3. Wet the brush head and apply toothpaste to it.
4. Place the bristles of the toothbrush on the teeth, near the gums.
5. Turn the toothbrush on using the on/off button.
6. Move the bristles back and forth over your teeth and slowly move between the
individual teeth. At the same time, gently push the brush towards and between
the teeth
7. For best results, divide the brushing into 4 sections. Take 30 seconds for each secti-
on. After a 30-second cycle, the brush will pause and alert you to move to the next
section. After 2 minutes, the brush switches itself off.
8. Rinse the brush head under running water. Wipe the body of the brush with a
damp cloth and then wipe it dry with a cloth or towel .
9. Put the body of the toothbrush back into the glass or store it in the travel case.
UV Steriliser
1. Use the button to open the lid of the UV sterilizer .
2. Place the toothbrush or brush head in the UV sterilizer. The bristles should face
the UV lamp .
3. Close the lid. Sterilisation will begin automatically.
4. Sterilisation lasts 3 minutes. Do not open the lid during the sterilisation process.
5. Once the UV light switches off, you can open the lid and remove the toothbrush
or brush head.
1
5
2
3
4