Trueheat Trueheat Range Series, Инструкция по установке и эксплуатации

Страница: 20 / 60

If any ports remain clogged, remove the burner cap and complete burner and
clean thoroughly with a suitable detergent and hot water. Dry thoroughly,
ensure the air shutter is fully open, reinstall (ensure the injector is located in
the burner venturi), ignite and check the flame pattern.
Note:
The burner flame should be uniformly blue. If yellow flames are present,
this may indicate that grease and dirt are present in the burner throat. Remove
and clean the burner per the above.
ENAMELLED TRIVETS
The enamelled trivets should be removed from the appliance before cleaning.
To clean the trivets, wash with warm water and a suitable detergent using a
soft cloth and then dry.
Note:
Do not use abrasives pads or chemicals – these will damage the
enamelling.
For heavily soiled trivets, use a suitable oven cleaner and non-abrasive pad or
brush.
Range Manual Page 20 Revision: 13 Sep 07
OPERATOR MANUAL 130907.doc