Mini Smoke Detector (Mini-SD-ZBS)
Limitations
Do not install the Mini Smoke Detector exposed to direct sunlight.
Avoid installing the Mini Smoke Detector in areas where devices may cause rapid change of temperature in the detection area,
i.e. air conditioner, heaters, etc.
Avoid large obstacles in the detection area.
Do not pointing directly at sources of heat e.g. Fires or boilers, and not above radiators.
Avoid moving objects in the detection area i.e. curtain, wall hanging etc.
Press the Test Button to enter Test Mode. Walk around the protected area noting when the LED lights up and check that the detection
coverage is adequate.
When detection coverage is found to be satisfying, installation is now completed.
Mounting the Mini Smoke Detector
Step 1.
Place the Mini Smoke Detector at desired mounting location and use the Range Test function to make sure the Mini Smoked
Detector can be received by the Control Panel at mounting location.
Step 2.
The Mini Smoked Detector has a mounting bracket for ceiling installation. Use the holes on the bracket as template; mark the
mounting location on ceiling.
Step 3.
Screw the mounting bracket onto the ceiling according marked locations, drill holes in and insert wall plugs if required.
Step 4.
Align the mounting holes on Mini Smoke Detector with the hooks on the mounting bracket. Fit the Mini Smoke Detector onto
bracket and rotate clockwise to lock the hook. Installation is now complete.
The Mini Smoke Detector is designed to be mounted on the ceiling.
The ideal mounting height for the Mini Smoke Detector is 2.4 meters to 3 meters. Mounting above 3 meters can affect detection
performace.
One side of the Mini Smoke Detector has less detection coverage (2.5 meters) due to Mini Smoke Detector Chamber blocking the
IR coverage range.
The detection coverage for the Mini Smoke Detector is 10 meters horizontally and 5.5 meters vertically when the Mini Smoke Detector
is mounted as the below picture:
For optimal performance, rotate the Mini Smoke Detector so that the intruder would move across its detection area from side to side.
<NOTE>
To find out the “sides” of the Mini Smoke Detector. Hold the Mini Smoke Detector with LED indicator pointing upward, and the left
and right sides of the Mini Smoke Detector are considered the Smoke Detector’s sides. The Mini Smoke Detector sensor is most
sensitive when the intruder is moving from one side to the other.
Refer to the diagrams below for more information.
Maintenance
The top cover and the smoke detecting chamber can be detached from the Mini Smoke Detector for maintenance. Follow the steps
below to maintain the smoke detecting chamber:
Step 1.
Remove the top cover by gently pressing the latches by using your fingers.
Step 2.
Pull out the smoke detecting chamber.
