1. Place the concrete base in its intended location. The bottom of the base has adjustable feet to
accommodate for uneven flooring. Adjust each of the feet by turning them either clockwise or
counter-clockwise, checking with a level until the base is level both vertically and horizontally.
That’s it! We hope you enjoy your Casa Table. If you have any
questions or need assistance, feel free to reach us at
888-474-7977 or at [email protected].
If you have purchased a custom-sized CASA, simply follow
the directions above while using the overhang dimensions
provided in your technical drawing.
Setting the Base
2. The underside (subdeck) of the top has been predrilled to
accept screws. One location will be marked with a colored
circle that corresponds to a similar mark on one of the 4
brackets. This is done to ensure the top is orientated
properly and the holes align with the brackets. Identify
these marks on both the top and base.
3. Place the top on the base so that location of the two
colored dots align while centering it as well as you can by
eye. Once the top is on, make small adjustments until the
holes and brackets align by measuring the overhang on all
sides using values in the charts to the right.
4. Using a power drill with a Phillips-Head bit, drive screws
through the holes in each of the 4 mounting brackets and
into the wooden subdeck. You may wish to tighten with a
Phillips-head screwdriver to avoid stripping the pilot hole.
Placing the Top
For Custom Sizes
BASE
59” x 59” CASA
48” x 48” CASA
BASE
15”
12”
12”
12”
12”
15”
15”
15”
CASA CONCRETE TABLE
INSTALLATION INSTRUCTIONS
SKU: TBL-CASA / 59” & 48” SQUARE MODELS
