3. TrueConf Group Manager
This section shows how to set up
TrueConf Group using the remote control. To enjoy more convenient
administration and advanced features, we recommend using the
in the web interface.
3.1. Before You Begin
Warning!
Turn off equipment before connecting it to
TrueConf Group.
Connect the supplied equipment, display, and network interface to the endpoint system unit. In
addition, you can connect a US B keyboard if you want to control the device this way. Then connect
TrueConf Group to 110–240V grid using the power supply unit and turn it on by pressing the power
button on the front panel.
Once you have turned on the endpoint for the first time, you need to configure your network
connection parameters and
.
3.1.1. Setting an IP Address
To
set
an
IP
address,
gateway
and
subnet
mask
for
the
endpoint,
go
to
Configuration → Network → IPv4
.
If your network has a DHCP network service, check the corresponding box to configure the connection
automatically. Otherwise, configure the following parameters manually:
IP address
Mask
Gateway
Primary DNS
Secondary DNS
Interface settings
: To fine-tune the network, you can disable
Autonegotiate
and set up
Network
speed
and
Duplex mode
manually (
half duplex
or
full duplex
).
If your network uses IPv6, you can configure it in
Configuration → Network → IPv6
.
If the network connection is successful,
TrueConf Group IP address will be displayed at the top of the
screen.
3.1.2. Control Panel Access
To
manage
conferences
remotely
(using
the
web
interface),
go
to
Configuration → Network → HTTP
, enable
HTTP access
, select a por t, and set up authorization
data.
Once this is complete, you can access the control panel at the address specified in
. The
same address will be displayed at the top of the screen when working with the endpoint menu.
Tip
Для настройки доступа к панели управления терминалом по HTTPS воспользуйтесь
веб-интерфейса.
3.2. Language and Date Settings
Language settings are available in
Configuration → System
.
This section also allows you to set date and time settings. This can be done manually, but
TrueConf
Group can connect to Internet time services and synchronize parameters via NTP. To that end, indicate
TrueConf Group
User guide
© 2021 TrueConf. All rights reserved.
12
Содержание Group
Страница 1: ......
Страница 29: ...Wireshark TrueConf Group User guide 2021 TrueConf All rights reserved 29...
