STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model Elevation
Right
Plan
3D
PLAN VIEW
TS-23-2 TFGY07E
TFGY07S
TFEY03P
TFGY073
TS-23-2
83
5
/
16
"
(2117 mm)
DESIGN
• True’s commitment to using the
highest quality materials and oversized
refrigeration systems provides the user
with colder product temperatures,
lower utility costs, exceptional food
safety and the best value in today’s
food service marketplace.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
environmentally friendly (CFC free)
134A refrigerant.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser maintains 33°F to
38°F (.5°C to 3.3°C) for the best in food
preservation.
• Sealed, cast iron, self-lubricating
evaporator fan motors and larger fan
blades give True reach-in’s a more
effi cient, low velocity, high volume
airfl ow design. This unique design
insures faster temperature recovery
and shorter run times in the busiest of
food service environments.
• Bottom mounted condensing unit
positioned for easy maintenance.
Compressor runs in coolest and most
grease free area of the kitchen. Allows
for storage area on top of unit.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel
doors, front, and sides. Matching
aluminum back.
• Interior - 300 series stainless steel liner
and fl oor.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using
high density, CFC free, polyurethane
insulation.
• Cabinet mounted on a welded, heavy
duty galvanized frame rail. Rail dipped
in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 4" (102 mm)
diameter stem castors standard - locks
provided on front set.
DOORS
• 300 series stainless steel exterior and
door liner. Doors extend full width of
cabinet shell. Door lock standard.
• Positive seal self-closing doors.
Lifetime guaranteed door hinges and
torsion type closure system.
• Lifetime guaranteed recessed door
handles. Each door fi tted with 12"
(305 mm) long recessed handle that
is foamed-in-place with a sheet
metal interlock to insure permanent
attachment.
• Magnetic door gaskets of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Three (3) adjustable, heavy duty PVC
coated wire shelves 22
7
/
8
"L x 23
1
/
4
"D
(582 mm x 591 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on
1
/
2
" (13 mm) increments.
LIGHTING
• Incandescent interior lighting - safety
shielded. Lights activated by rocker
switch mounted above door
MODEL FEATURES
• Exterior mounted temperature
monitor.
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• NSF-7 compliant for open food
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for fi nal connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead time may apply.
❒
230 - 240V/50 Hz.
❒
6" (153 mm) standard legs.
❒
6" (153 mm) seismic/fl anged legs.
❒
Alternate door hinging (factory
installed).
❒
Additional shelves.
❒
Half bun tray rack holds up to eleven
18"L x 26"D (458 mm x 661 mm) sheet
pans (sold separately).
❒
Remote cabinets (condensing unit
supplied by others), consult factory
technical service department for BTU
information.
115/60/1
NEMA-5-15R
ELEVATION
PLAN VIEW
27"
(686 mm)
78
5
/
16
"
(1990 mm)
5"
(127 mm)
55
1
/
32
"
(1398 mm)
25
17
/
32
"
(649 mm)
29
1
/
2
"
(750 mm)
TS Series:
Reach-In All Stainless Steel
Solid Half Door Refrigerator
