STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366 • (636)240-2400 • FAX (636)272-2408 • (800)325-6152 • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor (U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
KCL
Model Front
Side
Plan
3D
PLAN VIEW
TA2HPT-2S-2S TFQY180E
TFQY196S
TFQY196P
TFQY1963
TA2HPT-2S-2S
DESIGN
• True’s solid door pass-thru heated cabinets
are designed with enduring quality that
protects your long term investment.
HEATER SYSTEM
• Cabinet is designed to provide holding
temperatures of 80°F to 180°F (26.6°C to
82.2°C). Heating system controlled by
exterior on/off switch and temperature
control dial.
• Two (2) stainless steel (for corrosion
resistance), fi nned tube heating elements
(1000 watts each) per section for uniform
generation of electric heat. Cabinet comes
with a total of 4000 watts.
• Cabinet equipped with 2 low-velocity fans
to assure even temperature distribution
throughout the cabinet. Fans are
controllable by exterior on/off switch.
• Manually controlled vent located on top of
the cabinet for positive humidity control.
• Exterior dial thermometer; accurate direct
reading of internal cabinet temperature.
CABINET CONSTRUCTION
• Exterior - 300 series stainless steel doors,
front, sides, back and bottom.
• Interior- andonized aluminum liner. 300
series stainless fl oor with coved corners.
• Stainless steel breaker caps.
• Insulation - entire cabinet structure and
solid doors are foamed-in-place using high
density, CFC free, polyurethane insulation.
• Welded heavy duty galvanized frame rail
dipped in rust inhibiting enamel paint for
corrosion protection inside and out.
• Frame rail fi tted with 6" (153 mm)
stainless steel legs.
DOORS
• 300 series stainless steel exterior and
door liner. Doors open within cabinet
dimension. Door locks standard.
• Lifetime guaranteed recessed door handles.
Each door fi tted with 12" (305 mm) long
recessed handle that is foamed-in-place
with a sheet metal interlock to insure
permanent attachment.
• Positive seal self-closing doors with 120
degree stay open feature. Lifetime
guaranteed door hinges and torsion type
closure system.
• Magnetic door gaskets of one piece
construction, removable without tools for
ease of cleaning.
SHELVING
• Six (6) adjustable, heavy duty chrome
shelves 23
1
/
2
"L x 28
13
/
16
"D (597 mm x
732 mm) with shelf clips and wall mounted
pilasters (factory installed). 1
1
/
16
" (27mm)
standoff insures optimum airfl ow.
• Aluminum shelf support pilasters; shelves
are adjustable on
1
/
2
" (13 mm) increments.
• Three (3) different interior kits available
(see Kit Options). Pilasters and tray slides
require fi eld installation.
LIGHTING
• Incandescent interior lighting; safety
shielded. Lights activated by exterior on/
off switch.
MODEL FEATURES
• True heated cabinets are designed to hold
warm baked or cooked food. Cabinets
are not designed to heat ambient or cold
product.
• NSF-4 compliant for open food product.
ELECTRICAL
• True requires that a sole use circuit be
dedicated for the unit.
• Unit comes with 4 feed wires (including
ground) to be hardwired at installation site
to a 115/208-240/60 Hz. single phase - 20
amp dedicated outlet.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒
Seismic/fl anged legs.
❒
Stainless steel rail skirt for use with legs
(fi eld installed).
❒
Additional chrome shelves.
❒
Metal door handle.
❒
Stainless steel (electro polished) shelves.
❒
Electronic temperature control (factory
installed).
❒
Correctional facilities options - consult
factory.
❒
Curb mountable units.
KIT OPTIONS
❒
Kit #1: Nine (9) sets of #1 type tray slides
and pilasters (fi eld installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan or two (2) 14"L x 18"D
(356 mm x 458 mm) pans.
❒
Kit #2: One (1) set half-section #2 steel rod
tray slides and pilasters (fi eld installed), rim
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan.
❒
Kit #3: Six (6) sets of universal type tray
slides and pilasters (fi eld installed), bottom
support of one (1) 18"L x 26"D (458 mm x
661 mm) pan, two (2) 12"L x 20"D (305 mm
x 508 mm) pans or two (2) 14"L x 18"D
(356 mm x 458 mm) pans.
❒
Additional kit option components available
individually.
TA Specifi cation Series:
Pass-Thru Solid Door Heated Cabinet
ELEVATION
PLAN VIEW
78
3
/
16
"
(1986 mm)
77"
(1956 mm)
51
3
/
8
"
(1305 mm)
38
9
/
32
"
(973 mm)
23
17
/
32
"
(598 mm)
84
5
/
16
"
(2142 mm)
6
1
/
16
"
(154 mm)
1
3
/
16
"
(31 mm)
FRONT OF CABINET
85
1
/
4
"
(2166 mm)
1"
(26 mm)
37
1
/
4
"
(947 mm)
1
1
/
32
"
(27 mm)
