17
I
NTENDED
U
SE
& W
ARNING
L
ABELS
WARNING LABELS
The following are the warning labels required for this product. If any of these labels are missing or
become damaged contact Paramount. Note: these labels are not to scale.
INTENDED USE
1. This unit is intended to support Olympic bars in multiple positions facilitating press, squat, row
or dead lift exercises.
2. Stop rods must be used when performing squat or pressing movements. Adjust their position
based on the exercise, user size and range desired. When doing squats DO NOT allow thighs to
drop below parallel with the floor - adjust stop rods accordingly. DO NOT place stop rods lower than
the position indicated on the machine when doing squats. ONLY perform squat and pressing
exercises from inside the framework of the cage. BE CERTAIN that the stop rods are fully engaged.
3. Adjust the catch assemblies into a comfortable position for the exercise. BE CERTAIN that the
retention pin is fully engaged.
4. Load and unload plates evenly onto the bar placing or removing one plate from one side and
then the other.
5. Spotters must be used when using this rack. More than one spotter may be required depending
upon the amount of weight being lifted.
6. Return the bar to the catch assembly in a controlled manner. Be certain that the bar is fully
engaged in the catch assembly before releasing the load and exiting the machine.
7. DO NOT stand on this rack when doing exercises.
8. DO NOT use bands or chains with the rack. DO NOT use loose weights when doing chin ups.
9. DO NOT attach straps or bands to the frame of this rack.
10. DO NOT exceed the load limit of 765 pounds (348 kg). Maximum user weight of 300 pounds
(136 kg) for the chin up station.
LBL-PR-XFW79
B 2065
LBL-WRN-0011
LBL-WRN-0014
