manualshive.com logo in svg

True G4SM, Руководство по установке


Поделиться
Скачать
background image

GLASS DOOR MERCHANDISERS

TEC_TM_105 REV. A

03/19/2021 

Page 11 of 22

truemfg.com

Cabinet Setup

Fig. 1.

 Installing top tab of shelf clip.

Fig. 2.

 The bottom tab of the shelf clip 

will fit tightly

Fig. 3.

 You may need to squeeze or twist 

the bottom of the shelf clip to install.

Fig. 5.

 GDM-5 models include an airflow guard on the rear shelves to maintain an air 

space at the rear of the cabinet.

Fig. 4.

 Installed shelf clip..

Shelf

Clip

Shelf

Shelf

Organizer

Pillaster

(I-beam)

Shelf

Standards

Retainer 

Clip

T-Series

& GDM-5

Airflow

Guard

WARNING

 – 

DO NOT

 use pliers or 

any crimping tools when installing 

shelf clips. Altering shelf clips in any 

way can lead to shelving instability.

Standard Accessories

Shelf Installation

1. 

Hook the shelf clips into the shelf standards. See fig. 1.

2. 

Push up on the bottom of the clip. See fig. 2.

NOTE:

 You may need to squeeze or twist the bottom of the 

shelf clip for proper installation. Position all four shelf clips 

equal in distance from the floor for flat shelves. Lower the 

front of gravity-feed TrueTrac organizers for proper feed.

3. 

Ensure the shelf clip is not loose or able to wiggle out of the 
shelf standard. See figs. 3 and 4.

4. 

Place the shelves on the shelf clips with the cross support bars 
facing down.

NOTE:

 Be sure all shelf corners are properly seated.

Installation Tips

•  Install 

all

 the shelf clips before installing any shelves.

•  Start at the bottom shelf and work your way up.
•  Always lay the back of each shelf down on the rear clips before 

the front.

Shelf Adjustment

Shelving is adjustable for customer application. This cabinet meets 
the IEC Shelf Weight Capacity of 47lb/ft2 (230kg/m2).

TrueTrac Organizers

TrueTrac organizers come with a package of shelf retainer clips.

Install the clips  on the side of the organizer towards the rear.  
See fig. 5.

Содержание G4SM























Отзывы:

Нет отзывов

Похожие инструкции для G4SM

Бренды по названию

Популярные бренды

Загрузить еще бренды