True FUSE XL-1100 Скачать руководство пользователя страница 33

Strength

Fuse XL-1100

Page # 33 of 34

CHAPTER 5:  ADDITIONAL INFORMATION

True Fitness Technology  •  O’Fallon, MO  •  Phone: 800-426-6570/636-272-7100  •  Truefitness.com

Save Time and Register Online!

Activate Multiple Warranties at truefitness.com

Keep this page for your records

The above Limited Warranty is subject to and will be in 

accordance with the conditions set forth below:

1. 

THIS LIMITED WARRANTY GIVES YOU SPECIAL LEGAL 

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH 

VARY FROM STATE TO STATE.

2. This Limited Warranty can be processed only if the Warranty 

Registration Form is completed online, or if the attached form 

is filled in, signed by the original purchaser, and mailed to 

TRUE within 30 days of purchaser’s receipt of this Product. The 

serial number must be intact on the Product for this Limited 

Warranty to be valid.

3. This Limited Warranty applies to the product only while the 

Product remains in the possession of the original purchaser 

and is not transferable

4. This Limited Warranty becomes VALID ONLY if the Product 

is initially assembled/installed by a TRUE authorized dealer/

technician (if anyone other than a TRUE authorized dealer/

technician initially assembles and installs the Product, this 

Limited Warranty will be void unless the written authorization 

of TRUE is first obtained).

5.  This Limited Warranty does not cover damage or equipment 

failure resulting from or caused by improper assembly/

installation, failure to follow instructions and warnings in 

owner’s manual, accident, misuse, abuse, unauthorized 

modification, or failure to provide reasonable and necessary 

maintenance (as referenced in thw owner’s manual.)

6. This Limited Warranty applies only to the cost of repair or 

replacement of parts and does not include labor (beyond 

the above warranty period), transportation, service, return 

and freight charges associated therewith except as expressly 

specified herein.

7. This Limited Warranty shall not apply to: Service calls to 

correct installation of the equipment or instruction to owners 

on how to use the equipment; or any labor costs incurred 

beyond the applicable labor warranty period.

8. This Limited Warranty, which is given expressely and in lieu 

of all other express warranties, constitutes the only warranty 

made by TRUE.

9. 

ANY IMPLIED WARRANTY, INCLUDING WITHOUT 

LIMITATION THE WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN 

DURATION AND REMEDY TO THE TIME PERIOD COVERED 

BY THE LIMITED WARRANTY. SOME STATES DO NOT ALLOW 

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY 

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

10.

 THE REMEDIES DESCRIBED ABOVE ARE YOUR SOLE 

AND EXCLUSIVE REMEDIES AND TRUE’S ENTIRE LIABILITY 

FOR ANY BREACH OF THIS LIMITED WARRANTY. TRUE’S 

LIABILITY SHALL UNDER NO CIRCUMSTANCES EXCEED 

THE ACTUAL AMOUNT PAID BY YOU FOR THE PRODUCT, 

NOR SHALL TRUE UNDER ANY CIRC UMSTANCES BE LIABLE 

FOR ANY CONSEQUENTIAL, INCIDENTIAL, SPECIAL, OR 

PUNITIVE DAMAGES OR LOSSES, WHETHER DIRECT OR 

INDIRECT. SOME STATES DO NOT ALLOW THE EXCLUSION 

OR LIMITATION OF INCIDNETIAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY 

NOT APPLY TO YOU.

NOTE TO AUTHORIZED WARRANTY LABOR PROVIDERS:

Warranty labor reimbursement or warranty parts rights may 

not be transferred to, reassigned to, a third party without the 

express written consent of TRUE.  Even jobbing out warranty 

labor requires TRUE’s written approval.

Fuse XL-1100 SERIAL NUMBER:

The Fuse XL-1100 comes with one serial number on the base of 

the machine. Please write down your serial number below and 

keep for your records.

SERIAL NUMBER:

SAMPLE SERIAL NUMBER STICKER:

Содержание FUSE XL-1100



































Отзывы: