CHAPTER 2: ASSEMBLY GUIDE
Truefitness.com / 800.426.6570 / 636.272.7100
21 of 50
ASSEMBLY STEPS:
Step 13B Safety Key (E-Stop) Usage:
Safety Key (E-Stop) Engaged:
Safety Key (E-Stop) Disengaged:
Shown to the left is the disengaged
position of the safety key (e-stop).
When the equipment is in use or the
user is standing on the belt not in use,
the safety key clip must be attached
to the user’s clothing. This allows the
safety stop to be engaged if the safety
clip attached to the user pulls the safety
key pull cord taught, thus immediately
halting all treadmill belt activity.
Note: The safety key pull cord length
allows free range of motion for the user
within the normal workout parameters
identified within this owner’s manual.
Shown to the left is the engaged
position of the safety key (e-stop). Note
the safety stop outer sleeve that covers
the safety stop to denote the engaged
position.
When the safety stop is engaged, all
treadmill belt activity will cease and the
following error message will appear on
the console advising the safety stop is
engaged “INSERT SAFETY KEY.”
To remove the console error message
and place the safety stop back in the
disengaged position, push the safety
stop in once.
Note: You will be taken to the workout
conclusion screen once the safety stop
is switched back to the disengaged
position.
