True Value Company
POS / SERVER SET UP
RockSolid Equipment Installation Instructions_beta
- 15 -
Display Pole
The Display Pole is an optional piece of equipment.
1.
Unpack the display pole.
2.
Assemble it according to the instructions enclosed with the
Display Pole.
3.
Connect the power cord to the USB cable.
4.
Locate the stack of 4 USB connections on the rear of the
PC.
5.
Connect the Display Pole to the USB port located at the top
of the stack as shown. The top port should always be used.
6.
You may get a message indicating that the system has
“Found New Hardware” and that the system asks you to
“Insert a Disk.”
7.
Be sure to cancel any “Found New Hardware” messages
that prompt you to continue or “Insert a Disk.”
8.
In the future, if you should move the computer, then the
display pole cable must be plugged into the top port.
