True-Surface Vibe V Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 88

background image

8

Be a Safe Operator



Think



Maintain Your Equipment



Use Your Equipment Only For Applications For Which It Was Created

The True-Surface

®

Vibratory Greens Rolling System was created for exclusive use on triplex mowers as a greens

maintenance tool. Use of the rollers in other application other will void its warranty and could possibly cause
equipment damage and personal injury. If you are interested in a True-Surface Vibratory Greens Rollers to fit your
walk behind greens roller, please check out

www.true-surface.com

for more information on the True-Surface

Trekker units.

Avoid Accidents

Most accidents, whether they occur in the industry, on the farm, at home, or on the highway are caused by human
mistakes. Most accidents can be prevented by careful operation and prevention.

Tips for Consistent Greens

Golfers demand consistent greens. They want to make sure they have the same putting conditions from green to
green. Only the

True-Surface

®

Vibratory Greens Rolling System

will provide consistent ball roll distance on all

greens.

To obtain consistency with the vibratory greens rollers follow this EXAMPLE:

Rolling at the same speed you mow equals 12 inches of Ball Roll Distance (BRD), then in order to achieve:



24 inches of BRD; roll at 1/2 the speed you mow;



18 inches of BRD; roll at 3/4 the speed you mow:



6 inches of BRD; roll at twice the speed you mow.

The variance of your greens mower’s RPM and ground speed will allow you to obtain

any

desired results. Now you

can adjust your roller’s vibration with the Select-A-Vibe

TM

Dial – customized to fit your greens mower. This

variable feature can

only

be obtained with the

True-Surface

®

Vibratory Greens Rolling System.

«
...
6
7
8
9
10
...
»

Содержание Vibe V

























































































Отзывы:

Нет отзывов

Похожие инструкции для Vibe V

Бренд: 3M Страницы: 26

Бренд: Sunx Страницы: 2

Бренд: FeiYu Tech Страницы: 5

Бренд: FEIYUTECH Страницы: 19

Бренд: FeiYu Tech Страницы: 25

Бренд: FEIYUTECH Страницы: 16

Бренд: paramondo Страницы: 44

Бренд: PAC Страницы: 4

Бренд: PAC Страницы: 4

SX-70 SODR-X-TRACTOR

Бренд: Pace Страницы: 2

Бренд: PAC Страницы: 8

Бренд: P1PE Страницы: 28

Бренд: Yard Machines Страницы: 44

Бренд: Yardworks Страницы: 21

Бренд: Honda Страницы: 73

ANDROID INTERFACE

Бренд: GMC Страницы: 18

Бренд: Prorack Страницы: 15

Бренд: MTD Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды