11052019
6
Figure 6
Thread Waist Buckle
STEP 2. With both left and right legs in the leg loops, slip your right arm through the right shoulder strap as shown in Figure 3. With your right arm in the
right shoulder strap, repeat this
STEP
for your left arm. The full-body fall arrest harness shall now be hanging loosely about your torso as shown in Figure
4.
STEP 3: Locate the waist belt and waist belt buckle as shown in Figure 1. Wrap the waist belt around your waist as shown in Figure 5. Thread the buckle
as shown in Figure 6. Extreme care must be taken to thread the waist buckle as depicted in Figure 6. Tighten the waist buckle until the waist belt is snug.
DO NOT overtighten as this may become very uncomfortable and potentially cut-off your circulation.
WARNING! DO NOT overtighten the waist belt as this may cut-off circulation and cause an unsafe condition. Failure to follow these instructions may
result in serious injury or death!
STEP 4: With the waist belt comfortably snug, locate the two (2) leg loop buckles as shown in Figure 1. Adjust both leg loop buckles so the leg loops are
positioned snugly in the groin area as shown in Figure 7. Tighten the leg loops so they are snug, however, not overly tight. Overtightening of the leg loops
will restrict circulation to the legs and cause an unsafe condition.
WARNING! DO NOT overtighten the leg loops as this may cut-off circulation and cause an unsafe condition. Failure to follow these instructions
may result in serious injury or death!
STEP 5: With the leg loops tightened to a comfortable fit and the waist belt adjusted snugly, your full-body fall arrest harness shall now be donned as shown
in Figure 8.
1
3
2
4
5
6
Figure 7
Tighten Leg Loops/Positioned
Figure 8
Full-Body Fall Arrest Harness Donned Correctly