............ www.truemfg.com ............
True Food Service Equipment, Inc.
3
3
The power cord of this appliance is equipped with a 3-
prong (grounding) plug which mates with a standard 3-
prong (grounding) wall outlet to minimize the possibility
of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
If the outlet is a standard 2-prong outlet, it is your
personal responsibility and obligation to have it replaced
with the properly grounded 3-prong wall outlet.
The unit should always be plugged into it’s own
individual electrical circuit, which has a voltage rating
that matches the rating plate.
This provides the best performance and also prevents
overloading building wiring circuits which could cause a
fire hazard from overheated wires.
Never unplug your freezer by pulling on the power cord.
Always grip plug firmly and pull straight out from the
outlet.
Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its length or
at either end.
When removing the freezer away from the wall, be
careful not to roll over or damage the power cord.
IMPORTANT ELECTRICAL SAFETY INFORMATION
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
WARNING!
USE OF EXTENSION CORDS / ADAPTER PLUGS
NEVER USE AN EXTENSION CORD! NEVER USE AN ADAPTER PLUG!
Do not use adapter plugs or extension leads as these
can cause safety issues and early failure of electrical components. The use of adapters and extension cords will invalidate
your warranty.
WARNING
Compressor warranties are void if compressor burns out due to low voltage.
WARNING
Power supply cord ground should not be removed!
NOTE
To reference wiring diagram - Remove lower rear grill. Wiring diagram is positioned on the inside cabinet wall.
SAFETY INFORMATION
