27
TRUE
refrigerated
prep
www
.
truemfg
.
com
COMPOSITE CUTTING BOARD MAINTENANCE
Please see comments from Supplier regarding composite cutting
boards below.
NOTE:
Composite Cutting Boards Manufactured From Richlite
Material and Warping.
“To prevent warping on cutting boards manufactured from Richlite
®
material, simply turn the board over on a regular scheduled basis.
Warping is caused by continued moisture and temperature differenc-
es on the top and bottom of the boards. By turning the board over,
this will allow both sides of the board to receive the same exposure.
There is a chance that larger size boards may warp as a characteristic
of the material.”
GENERAL MAINTENANCE
PERIODIC MAINTENANCE FOR LIDS
NOTE:
Because lid pin screws are designed to be removable for
cleaning, it is important these are checked periodically to assure they
are tight.
STEP 1
Check to see if lid assembly screws are tight. See Image 1.
STEP 2
Use screwdriver to tighten screws into place. See Image 2.
STEP 3
Make sure that screws are secure.
1
Inside
2
Outside
