Item number: E43789
M A N A G E R E Z C H A I R
A. Remove all parts from carton and separate them into part number groups as indicated in the parts list.
B. To begin assembly, place the 5 Star Base (2) upside down and insert the Casters (1) into bottom of the Base
(2).
C. Turn the Base (2) right side up on the floor and insert the Gas Lift (4) into center hole on the Base (2).
D. Place the Telescoping Cover (3) over the Gas Lift (4) and rest it on the Base (2).
E. Attach Seat Plate (5) to the bottom of Seat and Back Cushion w/ Arms (6) (with the FRONT of seat plate facing
FRONT of seat cushion) by using 1-5/8" Long Knobs (7) in the front holes and 7/8" Short Knobs (8) in the rear
holes of Seat Plate (5) and
tighten knobs completely.
F. Place the Pre-assembled Seat and Back Cushions w/ Arms (6) and Seat Plate (5) on top of Gas Lift (4) and
press down until fully engaged.
G. Standing in front of the chair, push the back cushion into an upright position. Check to make sure the pins have
locked into the arm holes correctly. (Refer to Diagram 1 and Diagram 2)
H. Periodically (every 90 days) make sure that the screws and knob are still fully tightened.
ATTENTION: Make certain all screws and knobs are fully tightened before using chair.
Part #
Description
Quantity
1.
2.
3.
4.
5.
6.
7.
8.
9.
Casters
5 Star Base
Telescoping Cover
Gas Lift
Seat Plate
Pre-assembled Seat and
Back Cushions w/ Arms
1-5/8" Long Knobs
7/8" Short Knobs
Allen Keys(Attached to seat
cushion bottom)
5
1
1
1
1
1
2
2
2
P A R T S L I S T
A S S E M B L Y I N S T R U C T I O N S
