Model #: 43506
E X E C U T I V E C H A I R
Part # Description
Quantity
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Casters
5 Star Base
Telescoping Cover
Gas Lift
Seat Plate
Arms
Seat Cushion
Back Cushion
Back Support Plate (already
attached to the back cushion)
1-5/8” Screws
7/8” Screws
1-1/4” Screws
2-1/2” Screws
Black Plastic Caps
Allen Key
5
1
1
1
1
2
1
1
1
2
2
4
4
4
1
A.
Remove all parts from carton and separate them into part number groups as indicated in the parts list.
B.
To begin assembly, place 5 Star Base (2) upside down and insert Casters (1) into bottom of Base (2).
C.
Turn Base (2) right side up on the floor and insert Gas Lift (4) into center hole on Base (2).
D.
Place Telescoping Cover (3) over the Gas Lift (4) and rest it on the Base (2).
E.
Attach Seat Plate (5) onto the bottom of Seat Cushion (7) (with front of Seat Plate facing front of Seat Cushion) by
using 1-5/8” Screws (10) for front holes of Seat Plate (5) and 7/8” Screws (11) for rear holes of Seat Plate (5)
and tighten screws.
F.
Align Back Cushion (8) with Seat Cushion (7) by positioning Back Support Plate (9) over the Seat Plate (5) with
1-1/4” Screws (12) as shown in Diagram 1. Do not tighten screws completely.
G.
Place the assembled chair on top of Gas Lift (4) and press down until fully engaged.
H.
Insert 2-1/2" Screws (13) into arm holes attaching Arms (6) to sides of Seat Cushion (7) and Back Cushion
(8). Now, tighten all the screws. Remember to tighten the back support plate screws also!
I.
Place Black Plastic Caps (14) into arm holes once screws have been tightened.
J.
Periodically (every 90 days) tighten all screws in the chair.
ATTENTION: Make certain all screws are fully tightened before using chair.
A S S E M B L Y I N S T R U C T I O N S
P A R T S L I S T
