Cleaning
Your Cooktop
Before using the cooktop for the first time, clean it to protect the top and makes cleanup easier.
1. Daily use of ceramic glass cleaner when the cooktop is cool will keep the cooktop looking new.
Please follow these directions along with Important Safety steps for cleaning, advised at the
beginning of the manual. Use a ceramic glass cleaner on the glass cooktop. To maintain and
protect the surface of your glass cooktop, follow these steps:
3. Use a paper towel or a soft cleaning pad for ceramic surface to clean the entire cooktop
surface.
4. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.
Never run
the cooktop under water.
NOTE:
It is very important that you DO NOT use the cooktop until it has been thoroughly cleaned.
Cleaning
Burned on
Residue:
Cleaning
heavy
burned - on
residue:
1
.
Allow the cooktop to cool.
Metal
Marks
and
Scratches
:
2
.
Used a single-
glass surface, and
scrape offtheresidue.
edge
razor
blade
scraper
approximately
at a 45 degree
angle
against
the
NOTE:
replaced. Contact
the manufacturer
for assistance.
If
cracks
or
indentations
in
the
glass
surface
occurs, the
cooktop
glass
will
have
to
be
Be
careful
not
to slide
pots
or
pans
across the
cooktop
surface
.
It
will
leave
behind
metal
markings
.
These
marks
are removable
using
the
ceramic glass
cleaner
along
with
the
cleaning pad for induction
cooktop.
If pots
with
a
thin
overlay
of aluminum or copper boil dry, the overlay may leave a black
discoloration on the cooktop. This
should
be
removed
immediately
before
using
the
cooktop
again
or
the
discoloration
will
become permanent.
4
.
For
additional
protection, after all residue has
been
removed, polish the entire
surface
with
the
ceramic glass cleaner
and
a
paper towel.
3
.
After scraping
off the residue, apply a few drops of the ceramic glass cleaner on
the
entire
burned residue
area. Use the cleaning
pad
to
remove
any
remaining
residue.
WARNING:
Damage to the glass surface may occur if you use scrub pads or any other type of
abrasive cleaning materials.
2. Shake the cleaning solution well. Apply a few drops of ceramic glass cleaner directly to
the cooktop.
14
1. Allow the cooktop to cool.
2. Spread a few drops of the ceramic glass cleaner on the burned residue area.
3. Using the ceramic glass cleaning pad, rub the residue area, applying pressure as needed.
4. If any residue remains, repeat the steps listed above.
5. For additional protection, after all residue has been removed, polish the entire surface with
the ceramic glass cleaner and a paper towel.
