True blue power TWC15 Series, Руководство пользователя

Страница: 14 / 18

13 Manual Number 9019726 • Revision A, February 15, 2022
Mounting TWC15 units below the panel using a direct mount to the wireless charger requires
countersinking holes (see Figure 3.5 above) for a #2 screw. Additionally, the label on top of the
wireless charger has 4 small gray dots in each corner. A push pin can be used to punch
through the label to allow the 2-56 screws (qty 4) to attach from above per Figure 3.6.
Figure 3.6
Threaded Hole Locations for 2-56 Threaded Holes
Figure 3.7 Flush Mount
(-1 Configuration Shown)
Mounting TWC15 units flush (from above) requires providing a recess height equivalent to the
height of the charger. Cutouts need to be made in the panel to allow for connection of the 4-
pin connector; 4 drilled holes are also required to provide attachment from below with 2-56
screws.