background image

TruXedo Inc.

 

 2209 Kellen Gross Drive, Yankton, SD 57078 

 877-878-9336 

 truxedo.com 

©

TruXedo Inc. 2020        

OWNER/USER RESPONSIBILITIES:

OWNER/USER RESPONSIBILITIES:

It is the responsibility of the owner/user to read this manual and comply with the operating procedures.  

It is the responsibility of the owner/user to read this manual and comply with the operating procedures.  

The owner/user is also responsible for inspecting the Sentry/ Sentry CT cover and for having parts 

The owner/user is also responsible for inspecting the Sentry/ Sentry CT cover and for having parts 

repaired or replaced when worn or damaged. Failure to follow safety instructions and warning labels could 

repaired or replaced when worn or damaged. Failure to follow safety instructions and warning labels could 

result in failure of your cover system and/or personal injury.

result in failure of your cover system and/or personal injury.

IMPORTANT OPERATING TIPS:

IMPORTANT OPERATING TIPS:

Truck bed cover must be free of foreign material including snow and ice

Truck bed cover must be free of foreign material including snow and ice

        before rolling cover open or closed.

        before rolling cover open or closed.

It is recommended to operate vehicle with cover rolled closed and latched for

It is recommended to operate vehicle with cover rolled closed and latched for

       optimal fuel economy.

       optimal fuel economy.

After closing cover make sure hook and loop on both sides are engaged.   

 

 

After closing cover make sure hook and loop on both sides are engaged.   

 

 

If side rails are tipping, clamps can be adjusted to level the rails to ensure proper cover header    

 

If side rails are tipping, clamps can be adjusted to level the rails to ensure proper cover header    

 

 

fitment. 

 

 

 

 

 

 

 

 

 

 

 

 

 

fitment. 

 

 

 

 

 

 

 

 

 

 

 

 

 -  Prolonged cold weather will make cover fabric stiff. Move vehicle with cover unrolled and latched into    

 -  Prolonged cold weather will make cover fabric stiff. Move vehicle with cover unrolled and latched into    
 

the sun or indoors to warm the top surface.   

 

 

 

 

 

 

 

 

 

the sun or indoors to warm the top surface.   

 

 

 

 

 

 

 

 

If cover has been stored in a rolled up state for a long period of time it may take a few minutes for the    

If cover has been stored in a rolled up state for a long period of time it may take a few minutes for the    

 

cover to lay flat. The fabric material needs to relax to a flat state, this is normal.

 

cover to lay flat. The fabric material needs to relax to a flat state, this is normal.

DO NOT

DO NOT roll cover into rear cab window. 

 roll cover into rear cab window. DO NOT

DO NOT stow rolled cover against cab or cab window.  

 

 stow rolled cover against cab or cab window.  

 

  

Modification of accessories such as bed liners (including spray in liners) may be necessary  

 

 

 

allowing the truck bed cover side rails to fit properly between the front bulkhead and tailgate  

 

 

 

of the truck bed. 

 

 

 

 

 

 

 

 

 

 

 

SAFETY INSTRUCTIONS:

SAFETY INSTRUCTIONS:

1. 

1.  Do not place objects on or against cover or framework.

Do not place objects on or against cover or framework.

2. 

2.  Do not tie cargo to truck bed cover framework.

Do not tie cargo to truck bed cover framework.

3. 

3.  Never allow children or pets to occupy pickup box while cover is closed.

Never allow children or pets to occupy pickup box while cover is closed.

4. 

4.  Cover is not airtight. Special care is required to keep cargo clean and dry.

Cover is not airtight. Special care is required to keep cargo clean and dry.

5. 

5.  Fabric cover won't prevent theft of contents inside truck box.

Fabric cover won't prevent theft of contents inside truck box.

6. 

6.  Cover must be rolled fully open and secured with retainer straps when towing vehicle backwards.

Cover must be rolled fully open and secured with retainer straps when towing vehicle backwards.

7. 

7.  DO NOT stow rolled cover against cab window.

DO NOT stow rolled cover against cab window.

8.   DO NOT attempt to drive with cover in the partially open position!   

 

 

 

 

8.   DO NOT attempt to drive with cover in the partially open position!   

 

 

 

 

9.   A fully rolled open cover must always be secured with retainer straps. 

 

 

 

 

9.   A fully rolled open cover must always be secured with retainer straps. 

 

 

 

 

10. DO NOT operate vehicle with objects on top of the cover.

10. DO NOT operate vehicle with objects on top of the cover.

ADDITIONAL IMPORTANT SAFETY TIPS

CAUTION HIGH TEMPERATURE

 

TOP SURFACE AND BOTTOM SURFACE CAN BECOME 

EXTREMELY HOT TO TOUCH WHEN EXPOSED TO  

 

 

 

BRIGHT SUN AND OR HEAT. 

 

 

 

 

NEVER ALLOW CHILDREN OR PETS TO SIT ON COVER 

WHEN CLOSED OR ROLLED TO THE CAB.

CAUTION

 

ROLL COVER TIGHT. SECURE THE COVER APPROPRIATELY USING BOTH RETAINER 

STRAPS.  

DO NOT

 OVERTIGHTEN. 

DO NOT

 STOW COVER AGAINST CAB WINDOW.

Page 8

Содержание Sentry











Отзывы: