![Truck Hero extang XCEED Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/truck-hero/extang-xceed/extang-xceed_installation-sheet_1173971004.webp)
IMPORTANT
IMPORTANT NOTICE
Bed cover safe operation and use
While driving, the cover must be completely at and secure with all latches
in the closed position OR completely folded up (all panels) and secured at
the cab. DO NOT DRIVE with cover partially opened.
Tonneau Cover Positions While Operating Vehicle
Tail Panel Operation
Prior to vehicle operation, the bed cover MUST be properly secured.
CLOSED POSITION
To close the tailgate panel
To open the tailgate panel
All panels must be at, closed and FULLY LATCHED to the bed cover side rail.
FOLDED & SECURED FLAT AT FRONT OF BED
FOLDED POSITION
FOLDED & PROPPED UP TO CAB
FOLDED & PROPPED UP POSITION
Fold the cover open and lift it until it is vertical, or 90 degrees.
Release the prop rods from the rail clips and engage the
end of the prop rod with the ball tting of the cover bracket.
Always engage both sides.
Your cover should be rmly in
position with little to no movement
once the prop rods are locked.
Strap Storage
Position
The tailgate can be closed with the cover either
up or down.
Open the tailgate and reach under the driver’s
side of the tail panel for the rotary handle.
Rotate the handle to release both latches, lift
the panel to open.
To drive with your bed cover in the folded position, use the tie
down straps and buckles provided with your cover. Ensure that
BOTH buckle clips are fully inserted into the buckle ends located
on the front header panel of the cover, and adjust the straps to
ensure the cover is secure during vehicle operation. The clips should
be secured in the storage position, as shown in Figure1,
when the straps are not in use.
Figure 1
DO NOT DRIVE WITH THE TONNEAU
IN A PARTIALLY OPEN POSITION!
Additional Important Operating Tips
The bed cover MUST be free of foreign material including snow
and ice before opening the panels.
Do Not
tow your vehicle from the rear with the bed cover in place.
Do Not
operate the vehicle with objects on top of the cover.
FAILURE TO FOLLOW THESE CAUTIONS MAY RESULT IN SEVERE DAMAGE TO THE COVER
AND WILL VOID YOUR WARRANTY!
Remove any snow or
foreign matter before
folding the cover.
Do Not tow your vehicle
from the rear with the
cover on the truck.