3
1
8
5
1
0
1
0
- 3
0
The XCEED truck bed cover requires the
installation of rails and some small parts.
Note any damaged or missing
components before installing.
It is important that
all areas where the
bed cover mounts
are clean and free
of debris prior to
installing.
Item No. 31851010-30 4.16.19 DD
Extang, Corp., 2019. Printed in USA
If the truck
does not have
a bed liner, install the
cab/bulkhead seal.
Wipe the painted
surfaces with
isopropyl alcohol
before applying.
With the tailgate closed, place the Xceed
rails on the truck bed rail with the slotted
bracket forward toward the
cab/front and facing inside.
Front/Cab
Make sure the rail is clamped square with the truck bed rail
and bulkhead. Start at the front/cab and place the rst clamp
6 to 9 inches (152 to 229mm) from the front.
NOTE: Some drop in
liners may require
trimming in the corners
to t the rail tightly into
the corner of the bed.
Make sure the
clamp is inserted
all the way up
into the rail and
clamp teeth are
aligned to the rail
slots to ensure grip.
Tools required:
9/16” and 1/2” sockets and ratchet wrench,
Phillips screwdriver
